Triveni

Menu
Menu

Triveni HV4 is four layers protected Submersible Copper Winding Wire specially made for high-voltage motors. HV4 wires are additionally insulated with epoxy-enamelled coating in order to provide more strength. It gives more durability even after years of installation due to the thick insulation having good electrical and mechanical properties. HV4 Wire comes with a different base and enduring properties against heat and shock

Special Features

  • HV4 Insulation is specially made for submersible motors which operate voltage above 5000V.
  • Excellent Mechanical Strength and cut through resistance.
  • Low water/Moisture absorption.
  • Tear Resistant
  • Increased motor life due to joint free Bonded Insulation Significant Power Saving (Reduced Leakage Current @90°C and at high centrifugal pressure)
  • Increased modulus of elasticity making it softer & easy to wind.
  • Bonded Insulation Reduces water Seepage.

General data for hv4 submersible copper winding wire (5000v & above)

Conductor Diameter

MM

Overall Diameter

MM

Conductor Resistance At 20°C (Nominal)

Ω/KM.

Elongation

(MIN.)%

Approx Weight

KG/KM

2.20

6.85

4.498

35

64.591

2.30

6.95

4.116

35

68.414

2.40

7.05

3.780

35

72.378

2.50

7.15

3.483

35

76.480

2.60

7.25

3.221

36

80.723

2.70

7.35

2.986

36

85.105

2.80

7.45

2.777

36

89.628

2.90

7.55

2.589

36

94.289

3.00

7.85

2.419

36

101.358

3.10

7.95

2.265

36

106.329

3.20

8.05

2.126

36

111.439

3.30

8.15

1.999

36

116.689

3.40

8.25

1.883

36

122.078

3.50

8.35

1.777

36

127.607

3.60

8.45

1.680

37

133.276

3.70

8.55

1.590

37

139.085

3.80

8.65

1.507

37

145.033

3.90

8.75

1.431

37

151.121

4.00

9.00

1.360

37

159.308

4.10

9.10

1.295

37

165.697

4.20

9.20

1.234

37

172.226

4.30

9.30

1.177

37

178.895

4.40

9.40

1.124

37

185.703

4.50

9.50

1.075

37

192.651

4.60

9.60

1.029

37

199.739

*These are only indicative values. Improvement is an ongoing process at Triveni Conductors Ltd. and efforts exceed average values.
*Change in overall diameter can be done as per customer requirement